CHATPRIVACYDONATELOGINREGISTER
DMT-Nexus
FAQWIKIHEALTH & SAFETYARTATTITUDEACTIVE TOPICS
«PREV333435
The direct e-mesh thread. Options
 
Th3_tRuTh
#681 Posted : 3/16/2021 12:43:49 PM

YΕ«gen "a profound, mysterious sense of the beauty of the universe ... and the sad beauty of human suffering"


Posts: 54
Joined: 23-Jan-2021
Last visit: 17-May-2021
Location: Center of the universe
Anyone here using a DNA 75c mod? If so, would you mind sharing your current setup and settings?

Please and thank you.

I just ordered a Dovpo Mono SQ because the Geekvape Aegis Solo I have has had some major issues.

UPDATE: I rebuilt my rig using the fitted mesh method with #120 mesh. 60w, TCR set to 130, 200c, and vaped 15mg achieving an experience equal to what I would expect with that dose. I am going to bump the TCR up to 140 and shoot for a BT this evening. Then when the new mod arrives, I will use the same settings to see if there is any difference and continue to make minor adjustments to the TCR as needed.

UPDATE: I recently purchased a Dovpo Mono SQ. It's a DNA 75c device. The Evolv chipset is incredible. The mod is a bit pricey and most will probably not be interested in spending the money on it, especially those who are using something like the Aegis Solo and not experiencing any issues. However, anyone who has had issues getting this method to work consistently may want to check this out. It requires a free software called Escribe to customize and setup profiles but you can literally build your themes and profiles from the ground up. If you are familiar with TCR settings (a must if you are using the fitted mesh or the long strip methods), then you can use Escribe to build your own profile by customizing the TCR settings in Escribe. All I did was build a profile for 304 stainless with a TCR of 140, set the temp to 392f (200c). The temp control and ramp time on this thing are perfect. I don't have to prefire it, and it vapes the dose perfectly. I was super nervous at first because I had no idea how much variance there would be between the two devices but once I got the theme and the profile built, I didn't have to change anything or tinker with it, it just worked. Flawlessly. Highly recommend!
 

STS is a community for people interested in growing, preserving and researching botanical species, particularly those with remarkable therapeutic and/or psychoactive properties.
 
Woolmer
#682 Posted : 4/6/2021 8:53:18 PM

DMT-Nexus member


Posts: 153
Joined: 21-Jul-2019
Last visit: 16-May-2021
I'm having some issues with my vape. I bought a USV-L second hand but the VO chipset will not allow me to fire with the small amount of liquid (dmt) loaded onto the mesh. It often says the coil is dry and refuses to fire. If it ever does fire it does a terrible job at maintaining temperature. As soon as I inhale it seems to lose all power. I'm wondering if this is an issue with the chipset or something else I am not figuring out.

To note I am using SS316 300 micron mesh and wotofo profile 1.5
 
Loveall
#683 Posted : 4/6/2021 10:01:23 PM

πŸ’–

Chemical expertSenior Member

Posts: 2176
Joined: 11-Mar-2017
Last visit: 18-May-2021
Location: 🌎
Woolmer wrote:
I'm having some issues with my vape. I bought a USV-L second hand but the VO chipset will not allow me to fire with the small amount of liquid (dmt) loaded onto the mesh. It often says the coil is dry and refuses to fire. If it ever does fire it does a terrible job at maintaining temperature. As soon as I inhale it seems to lose all power. I'm wondering if this is an issue with the chipset or something else I am not figuring out.

To note I am using SS316 300 micron mesh and wotofo profile 1.5


Are you using the mesh that came with the wotofo profile? I had similar issues intermittently cutting my own mesh, but never with the stock mesh.

Do you make/load liquid DMT? Are you using 96% ethanol? Thanks.
β€œ... (a) psychedelic substance occasionally causes psychotic behaviour in people who have not taken it.”
Excerpt from a McKenna talk transcript / audio.
 
Woolmer
#684 Posted : 4/7/2021 7:16:16 AM

DMT-Nexus member


Posts: 153
Joined: 21-Jul-2019
Last visit: 16-May-2021
No, I am using my own mesh that I cut myself. Perhaps I should try the stock mesh.

I did not mean that I am using a liquid. I just meant that due to the usual dosage of dmt the goo that I load is such a small amount compared to what is normally vaped when vaping e-liquids that possibly this is the reason the chip does not pick it up.
 
Loveall
#685 Posted : 4/7/2021 9:33:00 AM

πŸ’–

Chemical expertSenior Member

Posts: 2176
Joined: 11-Mar-2017
Last visit: 18-May-2021
Location: 🌎
Woolmer wrote:
No, I am using my own mesh that I cut myself. Perhaps I should try the stock mesh.

I did not mean that I am using a liquid. I just meant that due to the usual dosage of dmt the goo that I load is such a small amount compared to what is normally vaped when vaping e-liquids that possibly this is the reason the chip does not pick it up.


Ok. You may be right about the mod possibly being confused. I would test the stock mesh, if it behaves like your cut mesh that may be the case. Or you can try fiddling with the settings, maybe try fixed wattage (starting low like at 5W). I've played around with fixed wattage (aegis legend) and it seemed to work (tested just our to curiosity, I still use TC by default).
β€œ... (a) psychedelic substance occasionally causes psychotic behaviour in people who have not taken it.”
Excerpt from a McKenna talk transcript / audio.
 
Woolmer
#686 Posted : 4/30/2021 11:37:56 AM

DMT-Nexus member


Posts: 153
Joined: 21-Jul-2019
Last visit: 16-May-2021
I think my issue is due to the software of the device as it is mentioned in some reviews that the device does a very good job at preventing dry hits, so I suppose perhaps too good of a job for vaping dmt Neutral

Does anyone know if it is possible to download an alternate software to this mod? I understand these do exist but seem to be specific to certain mods.
 
starway7
#687 Posted : 5/10/2021 12:55:06 AM

DMT-Nexus member


Posts: 96
Joined: 08-Sep-2018
Last visit: 18-May-2021
Location: colorado
My second attempt... with direct e mesh this time using an acurate 15mgs spice.. weighed this time!

My 75 watt JOYTCH eVIC VTC mini waterpipe..[with wotofo atomizer] 205c 35.5 watts/... vaped the 15mgs very quickly within 3 seconds after fireing the white vapor rose out of the water and i slowly inhaled almost all of it and held it in for 7 seconds...

I imeadiatly felt a sudden change in body perception as my hands and arms felt as if they were struck by lightning ..as my hands and arms felt distorted as if they were only half their size and length...?

[is this a sudden rush or blood pressure shift?] does this happen to others on a low 15mg dose?

Any way this time my body felt as if a coat was put on me and i had minor movement on the walls and ceiling not much visuals this time...? but the 15 mgs was a low dose and i didnt really expect much visuals...

My first attempt [posted on nexus] was more visual but it was an un weighed dose... posibly a little higher than 15 mgs...

I did galgle with some weak rue tea this time first but dont think it had a big effect..had i drank some rue tea first ..[untill i could feel the rue working]... the 15mgs posibly would have made the experiance more visual and colorful..

I never have tryed much with the dmt blast off method ..and found rue first can make a huge difference...

I guess this also depends on dmt purity!

 
starway7
#688 Posted : 5/10/2021 1:26:46 AM

DMT-Nexus member


Posts: 96
Joined: 08-Sep-2018
Last visit: 18-May-2021
Location: colorado
my first attempt using direct E mesh vaping went like this.....


Vaped many times using rue first..but this is first direct e mesh experiance..
my first try at direct e mesh vaping.....[before the post above..]

The dose i used was not weighed ..thats fine... because i was fairly shure it was a low dose on first try..
there was no black out ..i was to remember exhaling and carefully setting down the pipe...

I did swish a little concintrated rue tea sublingualy for a few minutes before vapeing ..

The vapor from my mini water pipe was tasteless!.. and very cool and smooth..it didnt come on super fast at first ..but the come up wasnt slow either...

It may have been slowed a little from the sublingual rue tea i took first..but i was comming up faster by the minute..[i also ate a peice of Ghirardelli [intense dark chocolate] 92 percent cacao]
before i vaped...

I remember this beautyfull gentle smooth buzz all over my body as i layed down..but i didnt see much open eye visuals ...and just a minor amount of closed eye visuals...

This was a small..[unweighed] first dose.. but i did get most of the white tastless vapor inside me..
Then with my eyes closed... i suddenly experianced a short.. but beautyfully vivid personal experiance of sudenly rideing in a fast boat cutting across the waves..

It was double hulled like a [catamaran] i think...

I remember feeling water spraying across my face as i was standing and holding on to something.. in one side of the double hulled craft!

It either had a powerfull motor ..or using sail power..it was really crashing over the waves!

It was like High definition tv!..only i was taking part in the scene! not just looking at the screen..

For a very small dose of spice...it gave me a short but powerfull experiance!

I think i was laying there about 30 minutes...the sublingual rue tea dose i took.. was small and not that strong ..but may have caused my come up to get very smooth and gentle..

I wasnt in elf land or a cosmic carnivle but this was a very small un weighed dose..

You can see the amount on my e mesh in picture below...somehow after taking photo it looked like molten gold sitting on the mesh!


















 
starway7
#689 Posted : 5/10/2021 1:27:40 AM

DMT-Nexus member


Posts: 96
Joined: 08-Sep-2018
Last visit: 18-May-2021
Location: colorado
my first attempt using direct E mesh vaping went like this.....


Vaped many times using rue first..but this is first direct e mesh experiance..
my first try at direct e mesh vaping.....[before the post above..]

The dose i used was not weighed ..thats fine... because i was fairly shure it was a low dose on first try..
there was no black out ..i was to remember exhaling and carefully setting down the pipe...

I did swish a little concintrated rue tea sublingualy for a few minutes before vapeing ..

The vapor from my mini water pipe was tasteless!.. and very cool and smooth..it didnt come on super fast at first ..but the come up wasnt slow either...

It may have been slowed a little from the sublingual rue tea i took first..but i was comming up faster by the minute..[i also ate a peice of Ghirardelli [intense dark chocolate] 92 percent cacao]
before i vaped...

I remember this beautyfull gentle smooth buzz all over my body as i layed down..but i didnt see much open eye visuals ...and just a minor amount of closed eye visuals...

This was a small..[unweighed] first dose.. but i did get most of the white tastless vapor inside me..
Then with my eyes closed... i suddenly experianced a short.. but beautyfully vivid personal experiance of sudenly rideing in a fast boat cutting across the waves..

It was double hulled like a [catamaran] i think...

I remember feeling water spraying across my face as i was standing and holding on to something.. in one side of the double hulled craft!

It either had a powerfull motor ..or using sail power..it was really crashing over the waves!

It was like High definition tv!..only i was taking part in the scene! not just looking at the screen..

For a very small dose of spice...it gave me a short but powerfull experiance!

I think i was laying there about 30 minutes...the sublingual rue tea dose i took.. was small and not that strong ..but may have caused my come up to get very smooth and gentle..

I wasnt in elf land or a cosmic carnivle but this was a very small un weighed dose..

You can see the amount on my e mesh in picture below...somehow after taking photo it looked like molten gold sitting on the mesh!


















 
«PREV333435
 
Users browsing this forum
Guest (2)

DMT-Nexus theme created by The Traveler
This page was generated in 0.406 seconds.