We've Moved! Visit our NEW FORUM to join the latest discussions. This is an archive of our previous conversations...

You can find the login page for the old forum here.
CHATPRIVACYDONATELOGINREGISTER
DMT-Nexus
FAQWIKIHEALTH & SAFETYARTATTITUDEACTIVE TOPICS
«PREV1920212223NEXT»
Bufotenine Extraction Options
 
69ron
#401 Posted : 4/15/2009 6:16:31 PM

DMT-Nexus member


Posts: 5826
Joined: 09-Jun-2008
Last visit: 08-Sep-2010
Location: USA
pH 11 is WAY TOO HIGH. If using calcium hydroxide, the bufotenine will start to decompose. Shoot for 8.5-9.5 and don’t go any higher.

Calcium hydroxide and also ammonium hydroxide (and very likely sodium hydroxide) can decompose bufotenine at pH 11, so be careful not to let the pH get too high. Sodium carbonate can’t decompose bufotenine at pH 11 according to SWIM’s tests.
You may remember me as 69Ron. I was suspended years ago for selling bunk products under false pretenses. I try to sneak back from time to time under different names, but unfortunately, the moderators of the DMT-Nexus are infinitely smarter than I am.

If you see me at the waterpark, please say hello. I'll be the delusional 50 something in the American flag Speedo, oiling up his monster guns while responding to imaginary requests for selfies from invisible teenage girls.
 

Good quality Syrian rue (Peganum harmala) for an incredible price!
 
mapp
#402 Posted : 4/15/2009 7:44:56 PM
DMT-Nexus member


Posts: 170
Joined: 17-Mar-2009
Last visit: 13-Feb-2024
SpasticSpaz wrote:
Re decanting: When you simmer the water extract in limonene, part of the water extract won't dissolve. You decant the limonene into a separate container, without permitting the gunk that didn't dissolve when the limonene was simmering to come over as well. It's the exact same thing as the limonene part of Jorkest's tek.


Edit: Okay, SWIM added limonene to his dark brownish powder and simmered for about 3 minutes.. He let it stop simmering for a few seconds and poured the limonene through a coffee filter into a pan container. The only thing that really got in the filter was a little bit of the brown powder. So the bufotenine is supposed to "fall" out of this cooling limonene? It's been about 50 minutes and SWIM sees nothing but the limonene. He just has this and the brown powder in his stovetop pan.. Wut?

So after an hour of cooling he is to take just the limonene in the container and simmer that again in the powder, and repeat filtering back into the container? Then the powder is trash?

SWIM thinks something didn't work. He followed all the steps, but used 4g seeds, 200ml water, 25ml 5% acidity vinegar, 800mg sodium carbonate, and 30ml limonene. What's the final product supposed to look like?

 
Fuego
#403 Posted : 4/16/2009 1:58:10 PM

Riggly Maynard Charlston Bentsworth |||


Posts: 119
Joined: 18-Jan-2008
Last visit: 15-Jun-2012
Location: my secret volcano lair, really everyone should have one its so cool
what do you all think about a dry tek a/b on the seeds using boiling xylene both times?
 
Jorkest
#404 Posted : 4/16/2009 4:03:39 PM

DMT-Nexus member

Moderator | Skills: Extraction Troubleshooting, (S)elf ProgrammingChemical expert | Skills: Extraction Troubleshooting, (S)elf Programming

Posts: 4342
Joined: 02-Oct-2008
Last visit: 19-Jan-2024
mapp..the filtering is probably filtering out all the bufo..so maybe if you soak it in acetone or alcohol you may be able to get it out...
it's a sound
 
Jorkest
#405 Posted : 4/16/2009 4:04:20 PM

DMT-Nexus member

Moderator | Skills: Extraction Troubleshooting, (S)elf ProgrammingChemical expert | Skills: Extraction Troubleshooting, (S)elf Programming

Posts: 4342
Joined: 02-Oct-2008
Last visit: 19-Jan-2024
Fuego wrote:
what do you all think about a dry tek a/b on the seeds using boiling xylene both times?


boiling xylene is fucking GROSS! d-limonene is the only thing SWIM will boil now
it's a sound
 
Fuego
#406 Posted : 4/16/2009 4:15:18 PM

Riggly Maynard Charlston Bentsworth |||


Posts: 119
Joined: 18-Jan-2008
Last visit: 15-Jun-2012
Location: my secret volcano lair, really everyone should have one its so cool
well, in concept will it pull it out nice and pure or leave a bunch of gook?
 
SpasticSpaz
#407 Posted : 4/16/2009 4:25:13 PM
DMT-Nexus member


Posts: 119
Joined: 02-Nov-2008
Last visit: 29-Jun-2011
mapp, that sucks...

I think Jorkest is right in that a good chunk of the bufotenine's probably in the filter. SWIY's expected yield would probably be ~100 mg, which is a _really_ small amount of stuff in absolute terms, easily small enough, I would think, that it could all be trapped in the filter.

SWIM tells me he didn't filter the limonene, he just decanted as much as possible (Which was most of it, the junk stayed pretty well at the bottom). That's why he did it twice, so that the amount of bufo left in the d-limonene he was unable to pour out from simmering container along with the nasty junk would be minimal.
 
Jorkest
#408 Posted : 4/16/2009 4:42:23 PM

DMT-Nexus member

Moderator | Skills: Extraction Troubleshooting, (S)elf ProgrammingChemical expert | Skills: Extraction Troubleshooting, (S)elf Programming

Posts: 4342
Joined: 02-Oct-2008
Last visit: 19-Jan-2024
Fuego wrote:
well, in concept will it pull it out nice and pure or leave a bunch of gook?


yes it would clean it very nicely..BUT...you will have trace amounts of xylene in it..

69ron's FOAF ate 100mg of xylene boiled bufotenine to test it out..and he said he was burping up xylene...which is gross..

so if you were to do a xylene boil...you would then want to take your crystals and put them in some acetone..and THEN let that evap..because whats going to happen is that the acetone will break apart the crystal lattice..and free the xylene caught in there...then you would evaporate the acetone..and you will be left with probably not as pretty crystals..but they should have a significantly less xylene content
it's a sound
 
SpasticSpaz
#409 Posted : 4/16/2009 4:53:29 PM
DMT-Nexus member


Posts: 119
Joined: 02-Nov-2008
Last visit: 29-Jun-2011
Dagger, could you please report back on how SWIY's end product was?
 
Jorkest
#410 Posted : 4/16/2009 5:11:20 PM

DMT-Nexus member

Moderator | Skills: Extraction Troubleshooting, (S)elf ProgrammingChemical expert | Skills: Extraction Troubleshooting, (S)elf Programming

Posts: 4342
Joined: 02-Oct-2008
Last visit: 19-Jan-2024
charcoaled?
it's a sound
 
SpasticSpaz
#411 Posted : 4/16/2009 5:14:32 PM
DMT-Nexus member


Posts: 119
Joined: 02-Nov-2008
Last visit: 29-Jun-2011
Hmm, that's frustrating.

I guess sticking to Jorkest's method is the way to go.
 
Jorkest
#412 Posted : 4/16/2009 5:23:41 PM

DMT-Nexus member

Moderator | Skills: Extraction Troubleshooting, (S)elf ProgrammingChemical expert | Skills: Extraction Troubleshooting, (S)elf Programming

Posts: 4342
Joined: 02-Oct-2008
Last visit: 19-Jan-2024
ahh its just one test...SWIM is still trying to figure out a simple way of purifying the bufo from d-limo tek further..because he vaporized some in a test tube and it left some residue..not sure what it is..but hes gonna see if he can grow some crystals in some slowly evaporating MEK...and will try acetone and maybe some ethanol..

that should purify it a LITTLE bit..

the reason he says this..is because when SWIM puts some of his bufo in MEK..there seems to always be little something that doesnt get absorb by it...which is strange...because this stuff came out of boiling d-limonene...

so what he did was he took all his bufo..yes all of it...and put it in a shot glass full of MEK...it may have been around 2g bufotenine in about 30ml MEK...the MEK turned very amber in color...he let everything settle...and then poured the amber MEK into another shot glass..then..with the solids that didnt get absorbed he poured another 20ml of MEK on top of them...now the interesting part is that there are still solids on the bottom..BUT the MEK is almost more yellow than amber now..its extremely light compared to the first one..so something is happening here that SWIM cant explain..

either the first MEK pull got more of the toxins out..and left the cleaner bufo...or it took the bufo and left more toxins that arent soluble in MEK...its hard to say...so SWIM is going to let these two different pulls evap..and see which one comes out cleaner..and then he'll have to test them..

he will probably do one more pull on the solids and see if he can get anything else to come out...

SWIM would have to say..that bufotenine purification is one difficult thing to do...SWIM can do the same EXACT thing three different times and come up with three different purities...

he can do a MEK:heptane pull once..and end up with fluffy white crystals...and he hasnt been able to do it again...not once...



EDIT: so the third pull..SWIM says is even LIGHTER than the second almost clear..but there are still solids..what are these solids..and where did they come from..and its not like there are just a few little chunks..it could be something like half a gram of material..

so SWIM is going to evaporate that MEK and see what comes out..and then dry out those solids to see what color they are..and what they smell like when vaporized...because SWIM personally is through with smoking toxins
it's a sound
 
Jorkest
#413 Posted : 4/16/2009 8:39:12 PM

DMT-Nexus member

Moderator | Skills: Extraction Troubleshooting, (S)elf ProgrammingChemical expert | Skills: Extraction Troubleshooting, (S)elf Programming

Posts: 4342
Joined: 02-Oct-2008
Last visit: 19-Jan-2024
ahh...and you know somebody who then just ate the seeds and had a nice experience!? that is interesting indeed...
it's a sound
 
Garulfo
#414 Posted : 4/16/2009 11:13:10 PM

DMT-Nexus member


Posts: 755
Joined: 18-Jan-2008
Last visit: 06-Jul-2011
Location: France
SWIM did a CASA (citric acid) on previously limonene extracted dark stuff. A lot of stuffed precipitated (around 1g), SWIM was excited... the precipitate appeared to be a dark sticky gum. SWIM added some calcium carbonate, wet, dried and put it in boiling limonene.
Limonene was evaporated and left less than 300 mg of something that did'nt want to fully dry. The limonene was not able to dissolve a glossy tar that remains.
Bioassay showed that the brown gum stuff is somehow psychoactive (seems less active that a previous naphta:MEK extract), but burning it showed also that a noticeable amount of material ashes remained so the limo->CASA->limo is far to be a pure product and it is quite harsh on SWIM lungs.
Getting fluffy crystals is still a dream for SWIM...
 
Fuego
#415 Posted : 4/17/2009 1:33:14 PM

Riggly Maynard Charlston Bentsworth |||


Posts: 119
Joined: 18-Jan-2008
Last visit: 15-Jun-2012
Location: my secret volcano lair, really everyone should have one its so cool
ive got a pretty good method for breaking the crystal structure and releasing xylene trapped in dmt and jungle spice extractions... you just get an id card or something and scrape it when its still slightly wet and then wipe it back on the pan wait for a little and do it again and again until it gets harder to scrape... it should turn a lighter color too... keep doing this until its flakey and has a soap consistancy and all the xylene should be out. hope it works for bufo... someone should be getting some seeds in today

also, would bufo acetate be soluble in acetone?
 
SpasticSpaz
#416 Posted : 4/17/2009 3:36:07 PM
DMT-Nexus member


Posts: 119
Joined: 02-Nov-2008
Last visit: 29-Jun-2011
Dagger,

That's probably true. SWIM just doesn't like other people potentially getting the error part of the trial-and-error inherent to refining a tek, especially if a tried-and-true method is out there. SWIM somewhat wishes in hindsight that he had perfected the tek a bit more before posting.

Also, the word "tarry" for SWIM conjures up a black tarry extract that produced nasty projectile vomiting when bioassayed. Not good memories.
 
Jorkest
#417 Posted : 4/17/2009 4:01:59 PM

DMT-Nexus member

Moderator | Skills: Extraction Troubleshooting, (S)elf ProgrammingChemical expert | Skills: Extraction Troubleshooting, (S)elf Programming

Posts: 4342
Joined: 02-Oct-2008
Last visit: 19-Jan-2024
hahaha Spaz...thats funny...so much puking when testing out bufo extracts for the first times..ahhahahaha makes SWIM laugh...not at you...but at his own memories of it...hehehehehe

and not sure about bufo acetate...might be a good test..

and xylene almost tends to stick to the alkies...but SWIM has used that method before to dry crystals..but there will always be a hint of solvent in anything you extract...so its best to finish with a solvent you arent to worried about ingesting minute amounts of
it's a sound
 
mapp
#418 Posted : 4/30/2009 5:09:13 PM
DMT-Nexus member


Posts: 170
Joined: 17-Mar-2009
Last visit: 13-Feb-2024
SWIM just did a tek posted by spasticspaz in the Smoking Colubrina Seeds thread in Other Entheogens, to his own honest provisions:

Cracked/dried 10g seeds in oven at 250F for 45 min, then at 450F for 15 min
Added ~3g(?) calcium hydroxide (eye balled 1/3 versus 10g crushed seeds)
Added (too much) water to the mix (it was liquidy)
But Evaporated/Dried in oven at 130F for 40 minutes, then at 450F for 10 min
Moved to a glass container with a lid
Added 190ml acetone to the mix and shaked periodically for 1 hr
Decanted acetone into a dish
Added 180ml acetone to the mix and shaked periodically for 1 hr
Decanted acetone with previous acetone into dish (this time when all the liquid was pouring, some of the powder that was not sticking to the bottom of the glass was basically impossible not to follow in the acetone..a coffee filter was not proving to help at all.. this wouldn't make a big difference in the tek after the forthcoming evaporation would it? ..SWIM experienced this same "predicament" with previous bufo tek attempts...)
Evaporated in oven at 200F for 2 hours


After evaporating at the end for 2 hours what is left is tar-ish, and glossy in the middle, not unlike how described previously in this thread... But SWIM put the dish back in the oven at only 100-250F for about 4 hours to try to get it drier, and then scraped - it's really a kind of thick syrupy viscosity that won't run, but doesn't seem collectable. SWIM can't really pick it up or anything, it just sticks to whatever touches it. Will it eventually dry out in the oven at this temp?

So is this actually a crude bufotenine extract? Smokable, snortable, pluggable Shocked, but not effective orally, rightWut?

Also, after have used the aforementioned tek, can SWIM use food grade d-limonene on his yield to any purifiying effect, or would it be a waste/damaging? ..Would he just simmer a small amount, add the bufotenine for 5 minutes, turn off heat, then toss the limonene & keep the tar?

 
soulfood
#419 Posted : 4/30/2009 5:27:50 PM

DMT-Nexus member

Senior Member | Skills: DMT, Harmaloids, Bufotenine, Mescaline, Trip advice

Posts: 4804
Joined: 08-Dec-2008
Last visit: 18-Aug-2023
Location: UK
What you have there will be bufotenine with other alkaloids and toxins.

I'd highly recommend purifying further.

SWIM tried smoking an impure extract and it wasn't making him nauseous but it wasn't potent enough to do the job.
 
mapp
#420 Posted : 4/30/2009 5:57:23 PM
DMT-Nexus member


Posts: 170
Joined: 17-Mar-2009
Last visit: 13-Feb-2024
soulfood wrote:
What you have there will be bufotenine with other alkaloids and toxins.

I'd highly recommend purifying further.

SWIM tried smoking an impure extract and it wasn't making him nauseous but it wasn't potent enough to do the job.


Ah. SWIM wasn't sure of the present toxin amount, as he had read that toasting the seeds before and after basifying removes the toxins. Although... SWIM only "toasted" at 450F in the oven for about 15 minutes each time..

But, as SWIY implies, purifying SWIM's extract would still make this more potent. How exactly, if possible, would SWIM purify this with limonene? He wouldn't want to screw up this late, and may just attempt purifying part of his yield..

 
«PREV1920212223NEXT»
 
Users browsing this forum
Guest

DMT-Nexus theme created by The Traveler
This page was generated in 0.092 seconds.