We've Moved! Visit our NEW FORUM to join the latest discussions. This is an archive of our previous conversations...

You can find the login page for the old forum here.
CHATPRIVACYDONATELOGINREGISTER
DMT-Nexus
FAQWIKIHEALTH & SAFETYARTATTITUDEACTIVE TOPICS
PREV12345NEXT
Dry ice to precipitate NMT carbamate out of NP solvent for ACRB extract Options
 
DonPeyote
#41 Posted : 9/12/2013 6:45:54 AM

DMT-Nexus member


Posts: 83
Joined: 19-Jul-2013
Last visit: 07-Feb-2018
I was more or less using 'Acacia Confusa Extraction by Yours Truly' by Joshisom, which is an A/B tek tailored to a kilo of AC bark.

The non-yield of the first pull baffles me. Perhaps I didn't heat it up enough after the dry ice treatment? At those temperatures, EVERYTHING falls out of solution. But of course I was measuring the temp. of the solution in the bath. It was around 84 degrees when I pulled it out, which is approx. ambient.

WTF?

 

Explore our global analysis service for precise testing of your extracts and other substances.
 
DonPeyote
#42 Posted : 9/14/2013 5:03:58 AM

DMT-Nexus member


Posts: 83
Joined: 19-Jul-2013
Last visit: 07-Feb-2018
The waiting is over!
The results are in: It worked!

Here's the photo's of Pull 2, 3, and 4:
DonPeyote attached the following image(s):
DMT1.JPG (2,152kb) downloaded 1,008 time(s).
DMT3.JPG (2,379kb) downloaded 1,006 time(s).
DMT5.JPG (2,427kb) downloaded 1,009 time(s).
 
DonPeyote
#43 Posted : 9/14/2013 5:08:08 AM

DMT-Nexus member


Posts: 83
Joined: 19-Jul-2013
Last visit: 07-Feb-2018
Oooops, I posted the same pull twice.

Here's the last one:
DonPeyote attached the following image(s):
DMT2.JPG (2,181kb) downloaded 1,008 time(s).
 
arcologist
#44 Posted : 9/14/2013 7:10:40 AM

DMT-Nexus member


Posts: 503
Joined: 11-May-2013
Last visit: 29-Nov-2020
Nice work! Does it scrape up well or is it gooey?
 
DonPeyote
#45 Posted : 9/15/2013 2:36:45 AM

DMT-Nexus member


Posts: 83
Joined: 19-Jul-2013
Last visit: 07-Feb-2018
It scrapes up quite adequately!

Thanks for your innovation with dry ice.

I was starting to think it was going to be another goo batch, but it crystallized hard on the 3rd day.

The only downside? is my yield: 2.2 grams
I have a feeling I lost a good chunk on my first pull. It was getting late, but I had the dry ice...
I must have made a mistake, as the rest of it went to plan.

Thanks again for your help!

DP
DonPeyote attached the following image(s):
IMG_1197.JPG (2,126kb) downloaded 986 time(s).
 
DonPeyote
#46 Posted : 9/25/2013 3:34:19 AM

DMT-Nexus member


Posts: 83
Joined: 19-Jul-2013
Last visit: 07-Feb-2018
Arcologist- You have devised the easiest method yet for separating NMT from DMT, yet very few people on the Nexus have taken notice.

Perhaps its politically incorrect to want clean DMT crystals?

Although its fine to extract DMT from MHRB, its anathema to do the same with ACRB.

I think it's silly to let a tree do my thinking for me.

As far as NMT is concerned, if you really want to, you can always extract it out of the carbamate, and adjust the admixture to your hearts content.

Afterall, this is the DMT Nexus, not the NMT Nexus!

Finally, your post should be pinned, so people can easily find out how to separate NMT from DMT.

DP

 
arcologist
#47 Posted : 9/25/2013 5:43:36 AM

DMT-Nexus member


Posts: 503
Joined: 11-May-2013
Last visit: 29-Nov-2020
Aww thanks Smile I'm just glad to share the info, I'm surprised no one else thought of it first.

Personally I'd rather have clean crystals, if only for the ease of handling and storage, and to have to smoke less material to break through. However the goo is certainly smoalkeable and works just fine.

As an addendum, I did end up converting the NMT carbamate back to fumarate. At some point I want to bioassay the pure NMT to see what it's like on its own.
 
Parshvik Chintan
#48 Posted : 9/25/2013 5:50:25 AM

DMT-Nexus member


Posts: 3207
Joined: 19-Jul-2011
Last visit: 02-Jan-2023
DonPeyote wrote:
I think it's silly to let a tree do my thinking for me.

you say that as if you feel you are smarter than the tree..
My wind instrument is the bong
CHANGA IN THE BONGA!
ๆจน
 
Metanoia
#49 Posted : 9/25/2013 4:26:15 PM

DMT-Nexus member


Posts: 1817
Joined: 22-Jan-2009
Last visit: 04-Aug-2020
Location: Riding the Aurora Borealis
arcologist wrote:
At some point I want to bioassay the pure NMT to see what it's like on its own.

I'm going to use this method on my next acrb extraction so that I can bioassay the NMT on its own. Thanks for some clever thinking!
 
benzyme
#50 Posted : 9/25/2013 4:51:38 PM

analytical chemist

Moderator | Skills: Analytical equipment, Chemical master expertExtreme Chemical expert | Skills: Analytical equipment, Chemical master expertChemical expert | Skills: Analytical equipment, Chemical master expertSenior Member | Skills: Analytical equipment, Chemical master expert

Posts: 7463
Joined: 21-May-2008
Last visit: 03-Mar-2024
Location: the lab
were any analytical tests conducted (m.p., GC/LC-MS, TLC, etc.) to characterize the product(s)? that's what typically done in method development. it's one thing to hypothesize about a technique/method, and another to make claims about its efficacy, especially a separation method.
"Nothing is true, everything is permitted." ~ hassan i sabbah
"Experiments are the only means of attaining knowledge at our disposal. The rest is poetry, imagination." -Max Planck
 
DonPeyote
#51 Posted : 9/27/2013 12:16:25 AM

DMT-Nexus member


Posts: 83
Joined: 19-Jul-2013
Last visit: 07-Feb-2018
I noticed that as soon as I placed the dry-ice cooled N.P. solution (naphtha) into the warm bath, it boiled.

What is going on there?

Also, I was afraid that with such sudden swings in temperature (ambient to sub-zero with dry-ice, sub zero back to ambient in the heat bath) the glass would fracture/shatter. The glass held up fine!

 
Davies01
#52 Posted : 9/27/2013 3:27:18 AM

DMT-Nexus member


Posts: 4
Joined: 21-Sep-2013
Last visit: 23-Oct-2013
Great job. Assuming dry ice isn't too hard to obtain this sounds like a great method that isn't out of reach for most. I think I'm going to start sniffing around for some.
 
arcologist
#53 Posted : 9/27/2013 4:23:57 AM

DMT-Nexus member


Posts: 503
Joined: 11-May-2013
Last visit: 29-Nov-2020
DonPeyote wrote:
I noticed that as soon as I placed the dry-ice cooled N.P. solution (naphtha) into the warm bath, it boiled.

What is going on there?


Strange, I didn't notice anything like this, maybe it has to do with the temperature shock since I think I let my solvent warm up a little bit in open air before putting it in the bath (I was figuring out what to do next). How warm was your bath? Mine was probably around 60 C (hot tap water).

There are some websites (google dry ice locator) that will show you the closest stores that carry it near you. It took me a whole day of driving around town looking for it, only to give up, go online and find a store 2 minutes from my house. Go figure.

The main issue I see with the method is that if you plan to add dry ice to your pulls as you do them, you're going to have to find a good way to store the dry ice for a few days so that it doesn't all sublime before you're finished. I bought a large block (4 lbs?) and it was gone within 24 hours (I kept it in the freezer). Maybe a closed cooler would be better, since my freezer was blowing (warm) cold air onto the dry ice constantly, speeding sublimation.
 
Dr_Sister
#54 Posted : 9/27/2013 4:45:43 AM

Synaptic cleft explorer

Chemical expert | Skills: Chemistry, Horticulture, Yoga, Meditation, Graphic/web design, MarketingSenior Member | Skills: Chemistry, Horticulture, Yoga, Meditation, Graphic/web design, Marketing

Posts: 299
Joined: 10-Dec-2010
Last visit: 13-Feb-2014
Location: good question
That's a really great application of the patent arcologist!. An in situ CO2 generator ... Sister LOVES it!
 
DonPeyote
#55 Posted : 9/28/2013 5:52:09 AM

DMT-Nexus member


Posts: 83
Joined: 19-Jul-2013
Last visit: 07-Feb-2018
Yes, dry ice lasts only hours, depending on storage! Mine lasted about 12 hours in the tropics, in a cooler.

My solution was to do all the pulls back to back, using fresh naptha for each pull, then treating each pull consecutively.

My logic is that un-saturated solvents have more room to 'pull' molecules. This probably hurts freeze precipitation somewhat?

Dy Ice is an excellent CO2 generator- It precipitates NMT carbamate like crazy!
 
downwardsfromzero
#56 Posted : 10/23/2013 12:40:25 AM

Boundary condition

ModeratorChemical expert

Posts: 8617
Joined: 30-Aug-2008
Last visit: 07-Nov-2024
Location: square root of minus one
In my thinking, would not the "NMT carbamate" (which is a misnomer for reasons I will go into) also be pulling some DMT with it when it precipitates? Here is my reasoning - get ready for some proper chemistry...

The carbamate is formed because NMT is a secondary amine. This means there is a hydrogen (H) atom attached to the amine nitrogen (N). It is this N-H bond which reacts with the carbon dioxide:
R2NH + CO2 -> R2NCO2H
This product is a carbamic acid. ('R' here is shorthand for an organic group, in this instance either the N-methyl group or the remainder of the tryptamine molecule - the 2-(indole-3-yl)ethyl moiety, to be precise. So what we are looking at is N-methyl-N-(2-(indole-3-yl)ethyl)carbamic acid).

The carbamic acid has a proton (H+) which may then transfer to any nearby basic nitrogen - which in this case could be on either the DMT or the NMT:
R2NCO2H + R3N -> (R3NH)+ (R2NCO2)-

This is the same process as that which occurs when, e.g., fumaric acid is added to a non polar solution of methylated tryptamine(s). With the carbamic acid in this case the precipitate is likely to be a mixture of DMT N-methyl-N-(2-(indole-3-yl)ethyl)carbamate and NMT N-methyl-N-(2-(indole-3-yl)ethyl)carbamate. That is, the respective DMT- and NMT- salts of the aforementioned carbamic acid.

Conclusion: there is still plenty of research to do here. The relative proportions of NMT and DMT will affect the amount of DMT which co-precipitates - if indeed the precipitate is the amine-carbamate salt, rather than the free carbamic acid. This may in part explain the low yields reported by some forum members who have used this technique.




โ€œThere is a way of manipulating matter and energy so as to produce what modern scientists call 'a field of force'. The field acts on the observer and puts him in a privileged position vis-à-vis the universe. From this position he has access to the realities which are ordinarily hidden from us by time and space, matter and energy. This is what we call the Great Work."
โ€• Jacques Bergier, quoting Fulcanelli
 
arcologist
#57 Posted : 10/23/2013 1:27:38 AM

DMT-Nexus member


Posts: 503
Joined: 11-May-2013
Last visit: 29-Nov-2020
Thanks for your input, so I presume what precipitates is actually a carbamic acid, not a carbamate?

downwardsfromzero wrote:
The carbamic acid has a proton (H+) which may then transfer to any nearby basic nitrogen - which in this case could be on either the DMT or the NMT:
R2NCO2H + R3N -> (R3NH)+ (R2NCO2)-

So the question is whether or not this reaction proceeds to any great degree.

Actually, looking at the reaction as stated in the original patent (attached to first post), it seems like the NMT would instead form a carbamate salt with itself more readily than with the DMT:

patent, equation 2 wrote:
2R2NH + CO2 -> (R2NCO2)-(R2NH)+

I'm no chemistry expert though, so correct me if I'm wrong.

I will note that there was a significant qualitative difference between the pre-dry-ice alkaloids and both the DMT and NMT that were collected separately afterwards. Both NMT and DMT fumarates were crystalline solids after separation but were a goo before separation. If there is any DMT that does precipitate with the NMT, it is surely a small quantity. I would love to do TLC to confirm this but I don't have the capabilities right now.

From further testing, it seems like it is better to use xylene as a solvent when adding dry ice, rather than naphtha, because too much DMT precipitates due to the drop in temperature, making it hard to make sure all of the NMT is reacted without several cycles of dry ice/warm bath. This doesn't happen with xylene.

My yields have been consistently around 0.7% DMT freebase (using the same source of bark). It's nothing near the 1.5% reported in the literature, but maybe my bark is not so great?
 
DonPeyote
#58 Posted : 10/24/2013 3:26:45 AM

DMT-Nexus member


Posts: 83
Joined: 19-Jul-2013
Last visit: 07-Feb-2018
Having done this reaction a few times, I think one must be careful not to "throw the baby out with the bath water".

The dry ice precipitates both the NMT and DMT, due to its low temperature.

Heat and agitation re-dissolves the DMT, which is stuck to the NMT carbamate, but
it's not obvious WHEN all the DMT is back in solution.

I think its probable that you will lose some yield in this process.

The first photo shows the preciptates after dry ice treatment of an ACRB extraction.

The second photo is of the NMT carbamate after decanting the DMT solution.
DonPeyote attached the following image(s):
Carbamate1.jpg (2,494kb) downloaded 817 time(s).
Carbamate3.jpg (2,416kb) downloaded 817 time(s).
 
arcologist
#59 Posted : 10/24/2013 4:04:49 AM

DMT-Nexus member


Posts: 503
Joined: 11-May-2013
Last visit: 29-Nov-2020
Yes, the naphtha can be a problem because the DMT precipitates with the temperature drop. I've had better results doing the reaction in xylene because this doesn't happen.

Keep in mind, you can always recover nearly everything by dissolving the precipitates in acidic water, basing with NaOH to ph 12, and then pulling with your solvent of choice.
 
Pixar
#60 Posted : 11/10/2013 11:14:12 PM

DMT-Nexus member


Posts: 228
Joined: 09-Nov-2013
Last visit: 16-Oct-2015
https://wiki.dmt-nexus.me/DMT_Fumarate

Thank you for bringing me to this discovery. ^

I'm also wondering if the carbamate is smokeable.

Thanks for sharing this method.
 
PREV12345NEXT
 
Users browsing this forum
Guest (3)

DMT-Nexus theme created by The Traveler
This page was generated in 0.054 seconds.