CHATPRIVACYDONATELOGINREGISTER
DMT-Nexus
FAQWIKIHEALTH & SAFETYARTATTITUDEACTIVE TOPICS
Exsperienced best e liquid setups for dmt in vapes Options
 
Whoareweami
#1 Posted : 1/8/2019 6:37:17 PM
DMT-Nexus member

New member

Posts: 4
Joined: 11-Aug-2018
Last visit: 08-Jan-2019
Location: Scranton
So I have been on this topic awhile and I have found some amazing very affordable vape setups that work wonders. Vaperesso NRG tank with a standard swag box. The nrg tank uses various ceramic coils they are high quality and work great. They also produce breakthroughable hits especially if you rip it once or twice be careful. I dissolve around 2.8 grams of white dmt in strait of liquid and that fills the tank just about. 1 ml to 1 gram dmt ratio you will end up with like 1.8 ml of juice or less so around 2.5 grams plus 2.5 ml of pg liquid will fill it. I cannot recommend this setup enough you can buy the entire thing including the exact coils you need for 45 dollars far superior to the vapor genie witch I have set aside. The same company vaperesso also sells a ccell type of pen cakes the orca again this is a wonderful setup perfect for stealth and on the go use. It's basically the same type of catriged you will find in standard ccell weed oil carts. The premium brand of these carts should be ccell brand is also recommended they all use the same technology. Basically when vaping dmt liquid you want a ceramic coil and a good one they are one tank use tho and should be discarded after the tank is done. I will not be checking this topic most likely but if you are looking and searching like I was look no further. This is tested many many many times by myself personally you want to set the wattage to around 33 on the vaperesso swag box mod the Nrg Tank is what you want with any of the ccell ceramic coils the ones with the lower resistance like the gt8 will work better but the ccell coil works great to and comes standard in the starter pack.Thumbs up
 

Psychedelic news, articles, interviews and art from the DMT-Nexus and other sources.
 
k.neo
#2 Posted : 3/6/2019 5:55:42 PM
DMT-Nexus member

New member

Posts: 17
Joined: 10-Feb-2019
Last visit: 12-Sep-2019
Location: the zone
Hi.
Being a vape newb I am at total disadvantage, when I try to research on vape stores I just cannot focus and understand what is the actual parts I require to have a fully working setup.

Could you please write down the actual parts list for a dmt able vape?
Thanks.
 
Propello
#3 Posted : 3/17/2019 2:03:45 PM

DMT-Nexus member


Posts: 367
Joined: 17-Mar-2019
Last visit: 17-Jul-2021
The gt8 coils has cotton, not ceramic. IT is just The ccell coil that is ceramic. You Can use Eleaf hw-c coils if You want Higher watts..
This coils Can tale 40-45 watts, and Are compatible.
 
Propello
#4 Posted : 3/17/2019 2:10:16 PM

DMT-Nexus member


Posts: 367
Joined: 17-Mar-2019
Last visit: 17-Jul-2021
k.neo wrote:
Hi.
Being a vape newb I am at total disadvantage, when I try to research on vape stores I just cannot focus and understand what is the actual parts I require to have a fully working setup.

Could you please write down the actual parts list for a dmt able vape?
Thanks.


https://www.vaporesso.com/vape-kits/veco-one
This is all You need. Leak proof, small ceramic coils, deliver 40w


The Swag kit is much more adcanced and exoensive. You also need an external 18650 battery for The Swag mod.
 
Afx
#5 Posted : 4/5/2019 11:51:11 PM

DMT-Nexus member

New member

Posts: 10
Joined: 24-Mar-2013
Last visit: 27-Jul-2021
Propello wrote:
k.neo wrote:
Hi.
Being a vape newb I am at total disadvantage, when I try to research on vape stores I just cannot focus and understand what is the actual parts I require to have a fully working setup.

Could you please write down the actual parts list for a dmt able vape?
Thanks.


https://www.vaporesso.com/vape-kits/veco-one
This is all You need. Leak proof, small ceramic coils, deliver 40w


The Swag kit is much more adcanced and exoensive. You also need an external 18650 battery for The Swag mod.


On the link, what is the difference between Standard and TPD Edition?
 
Propello
#6 Posted : 4/6/2019 1:02:58 AM

DMT-Nexus member


Posts: 367
Joined: 17-Mar-2019
Last visit: 17-Jul-2021
Just a warning label that this products contains Nicotine, which it of course does not.

Products Are The same. 2 ml tank, 1500 Mah battery capacity.
There Are 2 different ceramic coils.
0.5 ohm ca 30w
0.3 ohm ca 45w
 
fathomlessness
#7 Posted : 8/20/2019 2:29:07 AM

DMT-Nexus member


Posts: 962
Joined: 24-Jan-2015
Last visit: 28-Jun-2021
Apparently going above the 1:1 territory for DMT:Eliquid results in inaccurate dosage for many people on here (people get more than they bargained for in one dose). You can imagine the negative consequences of this (doing it in a place where u don't accidentally want to break through or have a deeper experience). I suppose this has made me cautious and i shoot for around 0.2:1 ratio now for microdoses and just use a GVG when I want a bigger hit.
 
KuzeMaf
#8 Posted : 9/27/2019 2:28:26 PM

DMT-Nexus member


Posts: 54
Joined: 02-Jul-2016
Last visit: 22-Feb-2021
Location: Samsara
Yea I've noticed that in general, these Eliquid vape pens are becoming increasingly intense experiences. A lot of ppl are dropping in massive doses.

I'm not against it, but I do believe in warning my friends that it may be stronger than expected.

Myself personally, I like to rip it long and hold it deep. But I can't lie, it's punched me in the throat a few times. Shocked Shocked
 
OneIsEros
#9 Posted : 11/29/2019 8:38:54 AM
DMT-Nexus member


Posts: 399
Joined: 16-Dec-2017
Last visit: 10-Jul-2021
posting just to save this thread
 
unlocked_doors
#10 Posted : 3/1/2020 5:37:47 AM

It's Cheshire Cat o'clock


Posts: 27
Joined: 26-Jan-2020
Last visit: 26-May-2021
Does anyone have any input on how ceramic coils can impact health? I've been reading about some of the potential concerns, such as microscopic silica powder which can cause lung and throat damage.

https://versedvaper.com/are-ceramic-coils-safe/

https://aspenvalleyvapes.com/ceramic-coils-vaping-dangers/

Thoughts?
“If someone is able to show me that what I think or do is not right, I will happily change, for I seek the truth, by which no one was ever truly harmed. It is the person who continues in his self-deception and ignorance who is harmed.”
― Marcus Aurelius
 
Propello
#11 Posted : 3/1/2020 9:33:57 AM

DMT-Nexus member


Posts: 367
Joined: 17-Mar-2019
Last visit: 17-Jul-2021
There are links below the youtube video if you want to do some research.

 
Egzoset
#12 Posted : 3/2/2020 3:38:32 PM

Vaporist of Borg


Posts: 200
Joined: 21-Oct-2010
Last visit: 23-Feb-2021
Location: Qc/Can
Salutations Unlocked_Doors,

unlocked_doors wrote:
...microscopic silica powder... Thoughts?


Let me guess, the need to overcome heat loss in "ceramic coils" implies higher-than-necessary temperature excursions which translate as thermal stress near their metal/ceramic interface...

M'well it's a concern that got me worried many years ago, when exposing my lungs path to the contact surface of a 50 Watts ceramic heating element, at first for nearly 3 minutes when using a bag for transit. Then before i even considered a migration to pulse heating, with metal and SiC foam loosely juxtaposed (...), it only made sense to also systematically integrate mechanical filtration layers concluding with moist cotton close to the condensation zone. Ultimately my goal is to further reduce an energy-per-puff requirement which i recently evaluated to range between 85 ~ 205 Joules using a mix of dry trichomes + shreaded herb in the bowl.

Contrary to slow/steady (thermostatic) processes i bet on the universal impossibility of propegating heat at infitine speed to limit thermal stress even more, hence intuitively expecting smaller individual contact-surface features (as microscopic trichomes) to heat up first. As a direct consequence i feel no incentives to invest resources on targets behaving like a collective which spreads some significant part of precious heat only to raise temperature globally, this later scenario serving little purpose at all.

Good day, have fun!! Cool
 
Quandril
#13 Posted : 3/30/2021 3:12:41 PM
DMT-Nexus member

New member

Posts: 1
Joined: 05-Aug-2018
Last visit: 10-Apr-2021
Location: Gent, Belgium
Whoareweami wrote:
So I have been on this topic awhile and I have found some amazing very affordable vape setups that work wonders. Vaperesso NRG tank with a standard swag box. The nrg tank uses various ceramic coils they are high quality and work great. They also produce breakthroughable hits especially if you rip it once or twice be careful. I dissolve around 2.8 grams of white dmt in strait of liquid and that fills the tank just about. 1 ml to 1 gram dmt ratio you will end up with like 1.8 ml of juice or less so around 2.5 grams plus 2.5 ml of pg liquid will fill it. I cannot recommend this setup enough you can buy the entire thing including the exact coils you need for 45 dollars far superior to the vapor genie witch I have set aside. The same company vaperesso also sells a ccell type of pen cakes the orca again this is a wonderful setup perfect for stealth and on the go use. It's basically the same type of catriged you will find in standard ccell weed oil carts. The premium brand of these carts should be ccell brand is also recommended they all use the same technology. Basically when vaping dmt liquid you want a ceramic coil and a good one they are one tank use tho and should be discarded after the tank is done. I will not be checking this topic most likely but if you are looking and searching like I was look no further. This is tested many many many times by myself personally you want to set the wattage to around 33 on the vaperesso swag box mod the Nrg Tank is what you want with any of the ccell ceramic coils the ones with the lower resistance like the gt8 will work better but the ccell coil works great to and comes standard in the starter pack.Thumbs up


What about the exact settings to get it working, what voltage? Temperature etc

Thanks in advance
 
 
Users browsing this forum
Guest (2)

DMT-Nexus theme created by The Traveler
This page was generated in 0.042 seconds.