CHATPRIVACYDONATELOGINREGISTER
DMT-Nexus
FAQWIKIHEALTH & SAFETYARTATTITUDEACTIVE TOPICS
«PREV7576777879NEXT»
Ethyl acetate approach [CIELO] Options
 
Twilight Person
#1521 Posted : 7/25/2023 8:25:33 AM

DMT-Nexus member


Posts: 171
Joined: 05-Feb-2023
Last visit: 04-Dec-2023
Location: Far from this Place
First I had mesc citrate from CIELO, it was a goo so I recrystallized in ethanol.
= mesc citrate

Then I took that and freebased it. Instead of doing liquid-liquid extraction (dissolve in water, add base) which I found seems like a wasteful process as freebase mesc is also soluble in water, I instead made it a dry version. Mesc citrate mixed with a little water + ca(oh)2 and then I dried it to powder.
= mesc freebase + calcium citrate/hydroxide

Then pulled from that with limonene to only take up the mesc freebase. Dropped some benzoic acid dissolved in also limonene inside and nice crystals formed.
= mesc benzoate precipitation

Quote:
The 69ron paste typically absorbs a lot of the limonene on the first pull. And sometimes it's inconsistent - some pastes absorb more than others. That may the case here. What ratios of powder, water, and limonene did you use?


Ratio was exactly the same like 69ron, which is actually the same like for CIELO. I wrote here:

Quote:
Simply used cacti powder + 1/4 ca(oh)2 + small pints of limonene


Also it was ~300 ml water for 100 g cacti powder. Limonene shots 50 ml per pull.

Good to know you say for some other people it also just absorbs. But I have to say it did not even look as if there could be any separation ever. Which seems strange to me as this process was also used all over the place if I read back in time.
~ O ~
 

Good quality Syrian rue (Peganum harmala) for an incredible price!
 
shroombee
#1522 Posted : 7/25/2023 9:18:27 PM

DMT-Nexus member


Posts: 544
Joined: 16-May-2014
Last visit: 04-Dec-2023
Twilight Person wrote:
First I had mesc citrate from CIELO, it was a goo so I recrystallized in ethanol.
= mesc citrate

What percentage ethanol did you use? And I assume you needed to boil the ethanol as you mentioned in the other thread?

Twilight Person wrote:
Ratio was exactly the same like 69ron, which is actually the same like for CIELO. I wrote here:

Quote:
Simply used cacti powder + 1/4 ca(oh)2 + small pints of limonene

Also it was ~300 ml water for 100 g cacti powder. Limonene shots 50 ml per pull.

Good to know you say for some other people it also just absorbs. But I have to say it did not even look as if there could be any separation ever. Which seems strange to me as this process was also used all over the place if I read back in time.

The 69ron TEK calls for 300 ml limonene for 100 g powder.

It's been a while and I don't have my notes handy, but I believe sometimes 150 ml of limonene is absorbed on the first pull. So if you only added 50 ml limonene it's likely to all be absorbed. It's not possible to squeeze out the absorbed limonene, no matter how hard you try.
 
Twilight Person
#1523 Posted : 7/26/2023 10:03:51 PM

DMT-Nexus member


Posts: 171
Joined: 05-Feb-2023
Last visit: 04-Dec-2023
Location: Far from this Place
Yes boil it at 80 °C with the minimum amount and and then it goes straight to the freezer! It was pure Ethanol or let it be 98+ % of course.

Maybe 98+ % IPA has the same effect?

About using more Limonene, yes after the first did not separate I of course threw more on it :/ But quickly I realized upon adding more and more it will not do for the better. Then before I got a 10x volume of sludge emulsion I switched to ethyl acetate and pulled from that remaining stuff.


Fun fact is I then proceeded as normal and again just got goo. Sadly I am really doomed with CIELO too Crying or very sad Seems like a systematic error, but it is ca(oh)2 and perfectly dried / ground cactus powder. Afterwards pure ethyl acetate and even the citric acid monohydrate. But now I accepted to just get goo and just perform a re-x afterwards. Will not make the same mistake again like the first tries and pour that goo off, which I believed to be still excess water Confused
~ O ~
 
shroombee
#1524 Posted : 7/26/2023 11:53:06 PM

DMT-Nexus member


Posts: 544
Joined: 16-May-2014
Last visit: 04-Dec-2023
Twilight Person wrote:
Yes boil it at 80 °C with the minimum amount and and then it goes straight to the freezer! It was pure Ethanol or let it be 98+ % of course.

Maybe 98+ % IPA has the same effect?

Could you try IPA? You might have developed a reliable method for recovering goo that we could add to the TEK. IPA is easier to obtain (and cheaper) than 190 proof ethanol.

Quote:
Fun fact is I then proceeded as normal and again just got goo. Sadly I am really doomed with CIELO too Crying or very sad Seems like a systematic error, but it is ca(oh)2 and perfectly dried / ground cactus powder. Afterwards pure ethyl acetate and even the citric acid monohydrate. But now I accepted to just get goo and just perform a re-x afterwards. Will not make the same mistake again like the first tries and pour that goo off, which I believed to be still excess water Confused

Try adding excess ethyl acetate to the pulls before adding citric acid. I was always successful getting xtals and the one outlier in my technique is using excess ethyl acetate. It's a theory that hasn't been tested yet (AFAIK).
 
Loveall
#1525 Posted : 7/27/2023 12:17:03 AM

❀️‍πŸ”₯

Chemical expertSenior Member

Posts: 3567
Joined: 11-Mar-2017
Last visit: 04-Dec-2023
Location: 🌎
Twilight Person wrote:
Yes boil it at 80 °C with the minimum amount and and then it goes straight to the freezer! It was pure Ethanol or let it be 98+ % of course.

Maybe 98+ % IPA has the same effect?

About using more Limonene, yes after the first did not separate I of course threw more on it :/ But quickly I realized upon adding more and more it will not do for the better. Then before I got a 10x volume of sludge emulsion I switched to ethyl acetate and pulled from that remaining stuff.


Fun fact is I then proceeded as normal and again just got goo. Sadly I am really doomed with CIELO too Crying or very sad Seems like a systematic error, but it is ca(oh)2 and perfectly dried / ground cactus powder. Afterwards pure ethyl acetate and even the citric acid monohydrate. But now I accepted to just get goo and just perform a re-x afterwards. Will not make the same mistake again like the first tries and pour that goo off, which I believed to be still excess water Confused


What is the temperature of the EA when you salt and the temperature of your fridge?
πŸ’šπŸŒ΅πŸ’š Mescaline CIELO TEK πŸ’šπŸŒ΅πŸ’š
πŸ’šπŸŒ³πŸ’šDMT salt e-juice HIELO TEKπŸ’šπŸŒ³πŸ’š
πŸ’šπŸƒπŸ’š Salvinorin Chilled Acetone with IPA and Naphtha re-X TEKπŸ’šπŸƒπŸ’š
 
Twilight Person
#1526 Posted : 7/27/2023 5:48:47 PM

DMT-Nexus member


Posts: 171
Joined: 05-Feb-2023
Last visit: 04-Dec-2023
Location: Far from this Place
I have checked IPA with some small residues which I still have and seems to work the same way. Allthough not sure about how efficient crystallization was, dont have much and my scale might become inaccurate.

About excess ethyl acetate: I have followed the TEK always close and lastly I just had a super tiny amount of cacti powder, still used a big load of solvent. I think I had like 300 ml at the end from just 15 g cacti. Still same goo. It's so strange I have used 4 different cacti now all with the same result.

About the temperature: I set the fridge even a little colder just to be sure. Thermometer showed 5° instead of 8°. And then I always place it out of fridge like the TEK is telling, before start salting.

It's pretty annoying to not succeed but now I dont care anymore because I turned at least that goo into crystals, that I did not throw away Rolling eyes Rolling eyes Rolling eyes I did my best trying things with toluene and limonene, but it was not reliable so my personal way might be just going CIELO and even if I get goo every single time just use that ethanol. Thumbs up
~ O ~
 
shroombee
#1527 Posted : 7/27/2023 10:10:17 PM

DMT-Nexus member


Posts: 544
Joined: 16-May-2014
Last visit: 04-Dec-2023
Twilight Person wrote:
I have checked IPA with some small residues which I still have and seems to work the same way. Allthough not sure about how efficient crystallization was, dont have much and my scale might become inaccurate.

If we can confirm IPA works as well as ethanol, and others can repeat the process, at least we'll have a goo recovery technique we can add to the TEK. What does the final product look? Easy-to-handle xtals?

Quote:
About excess ethyl acetate: I have followed the TEK always close and lastly I just had a super tiny amount of cacti powder, still used a big load of solvent. I think I had like 300 ml at the end from just 15 g cacti. Still same goo. It's so strange I have used 4 different cacti now all with the same result.

Okay, that probably puts the "excess EA" theory to bed.

Quote:
It's pretty annoying to not succeed but now I dont care anymore because I turned at least that goo into crystals, that I did not throw away Rolling eyes Rolling eyes Rolling eyes I did my best trying things with toluene and limonene, but it was not reliable so my personal way might be just going CIELO and even if I get goo every single time just use that ethanol. Thumbs up

The benzoic acid in limonene was not reliable?
 
Fruit is life
#1528 Posted : 7/29/2023 1:13:26 AM

DMT-Nexus member


Posts: 147
Joined: 18-Apr-2020
Last visit: 28-Aug-2023
Can confirm the Ethanol re-x worked for me, I just ran my first CIELO extraction on 100g bridgessi and got a crystalline brown oil after salting, after separating EA and leaving the goo to dry, I heated 30ml of 95% Ethanol to the boil and added it to the goo, I force stired the brown oil into the Ethanol, immediate separation of the goo and mescaline citrate occurred, with the goo dissolving into the Ethanol, I decanted that through a coffee filter to collect the white powdery xtals and put the Ethanol goo in the Freezer for 24h, some more crystals formed during that time which I filtered and dried and then evaped the remaining ethanol to yield small residue of brown oil which I might just add to the next extraction incase of any remaining mesc inside.

Overall my yield was pretty low 0.7% mesc (700mg), but I did really mess up the consistency to begin with, the 250ml water and lime paste was way too much water (oatmeal soup), so I had to add alot of extra lime to reach mash potato consistency and could have done a few more EA pulls but I ran out.. next extraction I know will be better and goo is no worries because ethanol re-x is so easy to do and works well.

I also have a feeling over salting bridgessi extracts will cause brown oil/goo to drop out due to bridgessi's large alkaloid profile so will try to use minimum amount of citric acid needed for xtalisation.
Fruit is life attached the following image(s):
20230727_165349.jpg (3,333kb) downloaded 233 time(s).
20230727_172545.jpg (2,525kb) downloaded 232 time(s).
20230729_080841.jpg (4,922kb) downloaded 234 time(s).
The self that talks doesn't know, the self that knows doesn't talk.
 
Loveall
#1529 Posted : 7/29/2023 3:53:37 PM

❀️‍πŸ”₯

Chemical expertSenior Member

Posts: 3567
Joined: 11-Mar-2017
Last visit: 04-Dec-2023
Location: 🌎
It is very surprising that 250ml of water made such a wet paste. How did you dry the cactus? What parts of the plant did you use? How did you grind to a powder?

πŸ’šπŸŒ΅πŸ’š Mescaline CIELO TEK πŸ’šπŸŒ΅πŸ’š
πŸ’šπŸŒ³πŸ’šDMT salt e-juice HIELO TEKπŸ’šπŸŒ³πŸ’š
πŸ’šπŸƒπŸ’š Salvinorin Chilled Acetone with IPA and Naphtha re-X TEKπŸ’šπŸƒπŸ’š
 
Fruit is life
#1530 Posted : 7/30/2023 5:01:15 AM

DMT-Nexus member


Posts: 147
Joined: 18-Apr-2020
Last visit: 28-Aug-2023
I was surprised also, maybe I didn't wait long enough for the paste to congeal but I couldn't see it thickening up that much..I used the whole bridgessi plant except the core (one of then was slightly rotten but was dried to a crispy cracker), I dried it over a week infront of a woodfire chopped up in small chips, I then powderised the chips in a vitamix blender, it was fine enough to look like vapour..I will try again in the next few days and see if I get the same result
The self that talks doesn't know, the self that knows doesn't talk.
 
Brennendes Wasser
#1531 Posted : 7/31/2023 5:55:16 PM

DMT-Nexus member

Chemical expert

Posts: 802
Joined: 23-Sep-2017
Last visit: 19-Nov-2023
Regarding the creation of benzoate salts and the discussion of drawing benzoic acid into the product, here is some data:

The solubility of benzoic acid in those solvents is as follows

Benzoic acid in Toluene (20 °C):
70 mg / 1 ml
0,7 g / 10 ml

Benzoic acid in Limonene (20 °C):
47 mg / 1 ml
0,5 g / 10 ml

This means as long as you would have an extraction from 100 g cacti and the expected solvent (now Toluene or Limonene instead of EA) at the end would be 800 (200 + 5x125) g (which should be 1000 ml) and you will add also 5 g (excess) benzoic acid (probably not needed because you will anyways create the mono-valente salt) the 5 g will definetly stay in solution. So in a regular extraction it would not even be possible to get benzoic acid into the final product, even in limonene solubility will be high enough.

Now I retrieved some Meskalin Citrate to make some experiments with it! Solubility was one of the first, but also all kind of other stuff done so expect the final chapter to the Chemical Guide coming soon Love As it seems solubility is quite high of Meskalin Benzoate in Toluene, because of this it would be mandatory to reduce the volume ... and reducing volume of some organic solvent for a smooth TEK is not really classy Embarrased Embarrased Actually this is really weird, because solubility of DMT Benzoate is really low in Toluene. And moving from DMT to Mescaline not only the logP already tells that it is much more polar: Simply judging by eye you migrate from -NMe2 -> -NH2 and also add 3x Ether groups. This should also make the overall salt Mescaline Benzoate way more polar than DMT Benzoate and thus make it precipitate much easier even in Toluene ... Confused In contrast stuff that would increase solubility in Toluene would be more double bonds or thiols / halogens attached to the ring. But that is not the case.

Limonene on the other hand has a solubility of nearly 0 for the Meskalin Benzoate. But then it would be interesting if people can confirm that separation from paste and limonene is indeed as easy as written in 69rons TEK ...
It could have the beauty of being inaffected by water content, so crystallization might be more fool proof. Still solubility might be better inside of the Limonene retrieved from an extraction than from Limonene that only carries the Alkaloid salt. Reason is if retrieved from a plant extract it will still have more oils and fats from the plant (which are left behind by salting) that could act like a coalescing agent and actually increase the salt solubility. So based on my pretty great crystallizations of Mes.-Benzoate in Limonene it is not safe to say if it would work the same in the Limonene from a plant extraction.



Lastly on the IPA/EtOH-rex:

Solubility seems pretty fitting for an easy process. Will post data soon with all the other diagrams. But it is reduced to < 20% in the Freezer compared to boiling, so it is not a wasteful process. But even more it seems as this goo (if you will get any) from CIELO is still mostly pure Meskalin Citrate.

I believe the problem here is not a wrong fridge decanting. Because I feel that this goo is free of water. It simply did not crystallize properly. Because of that it also does not contain any amount of unreacted citric acid, instead it is left behind in the EA that you decanted. That has the great benefit of simply evaporating all the IPA/EtOH instead of doing the rex in the Freezer. This way you also get crystals, but you will not loose any Alkaloids which did not precipitate. And even if your goo WOULD contain some water, it will co-evaporate with the alcohol, as it forms azeotropes with water and therefore also pull it out while evaporating down.


So regarding Mescaline Benzoate it would be interesting to receive it as an alternate salt option, but it seems to be somehow limited by not precipitating from 500+ ml Toluene and Limonene might not separate as nice as EA. Still it would be an interesting option, as I think from all the possible alkaloid salt combos Benzoic Acid is giving the superior properties to the compound. I checked evaporation on M-Citrate / M-Fumarate / M-Benzoate and M-Benzoate evaporates neatly like Freebase DMT even, same temperature and no combustion. That is now an interesting thing to test!

But apart from this property it seems as boiling your goo in IPA and evaporating it is just fine to solve all other potential problems.
 
Loveall
#1532 Posted : 8/2/2023 11:59:27 AM

❀️‍πŸ”₯

Chemical expertSenior Member

Posts: 3567
Joined: 11-Mar-2017
Last visit: 04-Dec-2023
Location: 🌎
Fruit is life wrote:
I was surprised also, maybe I didn't wait long enough for the paste to congeal but I couldn't see it thickening up that much..I used the whole bridgessi plant except the core (one of then was slightly rotten but was dried to a crispy cracker), I dried it over a week infront of a woodfire chopped up in small chips, I then powderised the chips in a vitamix blender, it was fine enough to look like vapour..I will try again in the next few days and see if I get the same result


I'm not familiar with woodfire drying, perhaps that makes a difference.

Earlier you mentioned you used minimal amount of citric acid, that is not reccomended. You want extra to citric to make conditions acidic during xtalization and form momo-mescaline citrate. With less citric, di or tri mescaline citrate can form in the form of goo from EA.
πŸ’šπŸŒ΅πŸ’š Mescaline CIELO TEK πŸ’šπŸŒ΅πŸ’š
πŸ’šπŸŒ³πŸ’šDMT salt e-juice HIELO TEKπŸ’šπŸŒ³πŸ’š
πŸ’šπŸƒπŸ’š Salvinorin Chilled Acetone with IPA and Naphtha re-X TEKπŸ’šπŸƒπŸ’š
 
Quetzal7
#1533 Posted : 8/2/2023 5:21:28 PM

DMT-Nexus member


Posts: 178
Joined: 08-Aug-2015
Last visit: 04-Dec-2023
Fruit is life wrote:
Can confirm the Ethanol re-x worked for me, I just ran my first CIELO extraction on 100g bridgessi and got a crystalline brown oil after salting, after separating EA and leaving the goo to dry, I heated 30ml of 95% Ethanol to the boil and added it to the goo, I force stired the brown oil into the Ethanol, immediate separation of the goo and mescaline citrate occurred, with the goo dissolving into the Ethanol, I decanted that through a coffee filter to collect the white powdery xtals and put the Ethanol goo in the Freezer for 24h, some more crystals formed during that time which I filtered and dried and then evaped the remaining ethanol to yield small residue of brown oil which I might just add to the next extraction incase of any remaining mesc inside.

Overall my yield was pretty low 0.7% mesc (700mg), but I did really mess up the consistency to begin with, the 250ml water and lime paste was way too much water (oatmeal soup), so I had to add alot of extra lime to reach mash potato consistency and could have done a few more EA pulls but I ran out.. next extraction I know will be better and goo is no worries because ethanol re-x is so easy to do and works well.

I also have a feeling over salting bridgessi extracts will cause brown oil/goo to drop out due to bridgessi's large alkaloid profile so will try to use minimum amount of citric acid needed for xtalisation.


Thanks for sharing, i was just asking myself if i can crystalize mesc critrate ; i guess IPA should work the same (i can get 99% here)

what's your favorite way of recovering the goo out of the CIELO? just pour out the EA , add a bit water and evaporate ?
 
Loveall
#1534 Posted : 8/2/2023 5:40:06 PM

❀️‍πŸ”₯

Chemical expertSenior Member

Posts: 3567
Joined: 11-Mar-2017
Last visit: 04-Dec-2023
Location: 🌎
Glad that alcohol re-X is working for people who get goo.

One word of caution, it may not be monomescaline citrate. Could be di or tri mescaline citrate and the dosages be off.
πŸ’šπŸŒ΅πŸ’š Mescaline CIELO TEK πŸ’šπŸŒ΅πŸ’š
πŸ’šπŸŒ³πŸ’šDMT salt e-juice HIELO TEKπŸ’šπŸŒ³πŸ’š
πŸ’šπŸƒπŸ’š Salvinorin Chilled Acetone with IPA and Naphtha re-X TEKπŸ’šπŸƒπŸ’š
 
Brennendes Wasser
#1535 Posted : 8/2/2023 6:39:58 PM

DMT-Nexus member

Chemical expert

Posts: 802
Joined: 23-Sep-2017
Last visit: 19-Nov-2023
I retrieved some other goo to test around and tried to convert it to Mescaline Benzoate, yet no precipitation and thus only Benzoic Acid after evaporation ... means in this other goo I had no alkaloids inside Sad(

The weight of the goo / Ca(OH)2 mix stayed exactly the same even after pulling with Toluene and Aceton. So that seems like no Alkaloid was extractable.

But then I got a strong Freebase Smell like after adding NaOH to a DMT extraction. So that MUST hint about it containing Alkaloids?

Sadly I dont have any way to analyze it currently (and anyways used up the last bit of what I was given). So still no idea if it truly contained Mescaline or not ... it smelled like it, but nothing was carried over after Freebasing (which definetly worked).




But in order to check if that goo might be just partially or complete Citric-Acid-Water-Mix instead:

I placed some goo in water before, dissolved completely, checked pH. It was not acidic. So must be a salt instead.

Next up check if it is even possible, that Citric Acid will "leave the EA" and separate as some goo with some of the water from wet EA (from mixing with water).

1. So mixed some 100% EA with some water, separated, (did not even fridge dry it,) then added citric acid.

2. As a control also did the same with 100 % EA.

Interestingly after 48 h in 1. everything was dissolved. No goo even with the "big load" of water without fridge decant.

But in 2. no Citric Acid was dissolved. It just stayed as crystals at the bottom.

So I feel that even with a lot of water, Citric Acid seems not to separate and form a goo (with that water) at the bottom. Instead just stays dissolved - at least for the "pure mix", about the cacti-derived no idea.

But because of that I think it is pretty unlikely that this goo would be just (or mostly) Citric Acid, that would require separation from any potential Mescaline Citrat.

Still then no idea why I could not extract anything from that last goo that I had ...
 
Twilight Person
#1536 Posted : 8/7/2023 12:15:40 PM

DMT-Nexus member


Posts: 171
Joined: 05-Feb-2023
Last visit: 04-Dec-2023
Location: Far from this Place
While doing my trials during the last time I was just curious experimenting with the mixing step. I guess this will be the one that is responsible how well the extraction from thne paste is going. The more mixing the better. So insted of using a spoon I was using a regular kitchen mixer. With my one d-limo trial it caused an emulsion of hell instantly. That was when I could not separate anything anymore, even with more d-limo.

But with ethyl acetate it works still brilliant, not forming any emulsion, no matter how hard you mix. Attached is a picture, maybe also try it. This can only make the mixing step more effective. Interestingly even in a big bowl there was absolutely no spilling of liquid.

Now as you cannot reach with a kitchen mixer into a french press, I was also doing the decant step in a different way. As long as the paste is not slimy, you can simply put it onto a kitchen sieve, wait for all the EA to drop off into your collector pot and then put it back into the bowl for 'kitchen mixing'. Very easy and also fast.

Cheers
Twilight Person attached the following image(s):
kuchynskΓ½ mixΓ©r.png (2,634kb) downloaded 147 time(s).
sito.png (2,815kb) downloaded 147 time(s).
~ O ~
 
Toshido
#1537 Posted : 8/10/2023 9:13:36 PM

Research & Development


Posts: 451
Joined: 12-Mar-2019
Last visit: 31-Aug-2023
I used an emulsion blender that fit perfectly into my french press and it worked well. About half way through my 2nd mason jar it became too slimy to use the blender though.

The cactus I had was bunk. The citric acid monohydrate I added didn't trigger the growth of any xtals and instead left me with a goo at the bottom, which I collected with hot water then evapped but it was still just a goo, I collected it, dunno what dose it is and I'm scared to ingest it. Could have been the cactus, or maybe because I ground the monohydrate crystals into a fine powder. Idk.

I have a new batch of cactus now, Trial 2 starting soon.

πŸŒ³πŸ‘¨β€πŸ”¬πŸŒ³ - My A/B Hot Plate TEK - πŸŒ³πŸ‘¨β€πŸ”¬πŸŒ³
🍜🍜🍜 - Don't Heat Your Naphtha, Heat Your Soup! - 🍜🍜🍜
✴✴✴ - White Spice vs Yellow Spice - 🌟🌟🌟
"You are an explorer, and you represent our species, and the greatest good you can do is to bring back a new idea, because our world is endangered by the absence of good ideas. Our world is in crisis because of the absence of consciousness." - Terence McKenna
πŸ™Œ "Dang, that's really impressive for a first extraction. Those xtals are nicely resolved." - Benzyme πŸ™Œ

 
endlessness
#1538 Posted : 8/11/2023 9:38:55 PM

DMT-Nexus member

Moderator

Posts: 14190
Joined: 19-Feb-2008
Last visit: 03-Dec-2023
Location: Jungle
I love this tek, so straight forward, easy, pleasant to do. I just made another mixed cact extract (with maybe 30% bridgesii), whole cact with skin and spines, and I got a 1.6% citrate yield. Lovely fluffy crystals.
 
Kash
#1539 Posted : 8/12/2023 4:54:16 AM

DMT-Nexus member

Senior Member | Skills: Chemistry and Programming

Posts: 833
Joined: 19-Oct-2010
Last visit: 21-Aug-2023
Location: Planet Earth
If endlessness endorses this one has to give this a try. Recently acquired some cacti powder so one can finally give this a go! Eager to see the results. Very happy

Cheers Loveall.
--------------------------------------------------*Kash's LSA Extraction* * Kash's Mescaline Extraction*------------------------------------------------------
All things I say are complete and utter ramblings of nonsense. Do not consider taking anything iterated from the depths of my subconsciousness rationally and/or seriously.
 
Loveall
#1540 Posted : 8/12/2023 4:37:08 PM

❀️‍πŸ”₯

Chemical expertSenior Member

Posts: 3567
Joined: 11-Mar-2017
Last visit: 04-Dec-2023
Location: 🌎
Kash wrote:
If endlessness endorses this one has to give this a try. Recently acquired some cacti powder so one can finally give this a go! Eager to see the results. Very happy

Cheers Loveall.

Thank you! Hope you enjoy the process 😊
πŸ’šπŸŒ΅πŸ’š Mescaline CIELO TEK πŸ’šπŸŒ΅πŸ’š
πŸ’šπŸŒ³πŸ’šDMT salt e-juice HIELO TEKπŸ’šπŸŒ³πŸ’š
πŸ’šπŸƒπŸ’š Salvinorin Chilled Acetone with IPA and Naphtha re-X TEKπŸ’šπŸƒπŸ’š
 
«PREV7576777879NEXT»
 
Users browsing this forum
Guest (3)

DMT-Nexus theme created by The Traveler
This page was generated in 0.574 seconds.